| PartNumber | PD080SY2 |
| Brand | E Ink |
| Size | 8.0 |
| Application | IA |
| Resolution | 800(RGB)×600 , SVGA |
| Composition | LCM |
| Brightness | 250 cd/m² (Typ.) |
| CR | 500:1 |
| Colors | 262K |
| Backlight | WLED |
| Interface | TTL |
| Panel Brand | PVI |
| Panel Model | PD080SY2 |
| Panel Type | a-Si TFT-LCD , LCM |
| Panel Size | 8.0 inch |
| Display Mode | TN, Normally White, Transmissive |
| Active Area | 162×121.5 mm |
| Outline | 183×141×6.6 mm |
| Surface | Antiglare |
| Contrast Ratio | 500:1 (Typ.) |
| Display Colors | 262K (6-bit) |
| Response Time | 15/25 (Typ.)(Tr/Td) |
| Viewing Angle | 70/70/50/70 (Typ.)(CR≥10)(L/R/U/D) |
| Frequency | 60Hz |
| Lamp Type | 3S9PWLEDWithout Driver |
| Signal Interface | Parallel RGB (1 ch, 6-bit), 60 pins |
| Input Voltage | 3.3/7.7/15.5/-6.5V (Typ.)(VCC/AVDD/VGH/VGL) |
| HJ080NA-04L | Innolux | 8.0 | 1024×768 |
| HSD080IDW1-A00 | HannStar | 8.0 | 800×480 |
| HSD080IFW1-A00 | HannStar | 8.0 | 1024×600 |
| LA080WV4-SD03 | LG Display | 8.0 | 800×480 |
| PD080SL1 | E Ink | 8.0 | 800×600 |
| PD080SL2 | E Ink | 8.0 | 800×600 |
| PD080SL3 | E Ink | 8.0 | 800×600 |
| PD080SL5 | E Ink | 8.0 | 800×600 |
| PD080SY1 | E Ink | 8.0 | 800×600 |
| PW080XU4 | E Ink | 8.0 | 480×220 |
| AA090AA01 | Mitsubishi | 9.0 | 960×540 |
| DLC1040ABG-3 | Other | 10.4 | 800×600 |
| G084SN03 V2 | AUO | 8.4 | 800×600 |
| KCS057QV1BR-G21 | Kyocera | 5.7 | 320×240 |
| LM-CK53-22NFR | SANYO | 9.4 | 640×480 |
| LQ104V1DG11 | SHARP | 10.4 | 640×480 |
| LQ121S1DG41 | SHARP | 12.1 | 800×600 |
| OEL9M0078-W-E | Other | 1.45 | 132×16 |
| PG320240C | Other | 4.7 | 320×240 |
| RGS27128064YW000 | RiTdisplay | 2.7 | 128×64 |