| PartNumber | PM102ZY3 |
| Brand | E Ink |
| Size | 10.2 |
| Application | DPF |
| Resolution | 1024(RGB)×600 , WSVGA |
| Composition | LCM |
| Brightness | 350 cd/m² (Typ.) |
| CR | 600:1 |
| Colors | 262K |
| Backlight | WLED |
| Interface | TTL |
| Panel Brand | PVI |
| Panel Model | PM102ZY3 |
| Panel Type | a-Si TFT-LCD , LCM |
| Panel Size | 10.2 inch |
| Display Mode | TN, Normally White, Transmissive |
| Active Area | 222.72×130.5 mm |
| Outline | 235×145.8×6.5 mm |
| Surface | Antiglare |
| Contrast Ratio | 600:1 (Typ.) |
| Display Colors | 262K (6-bit) |
| Response Time | 15/25 (Typ.)(Tr/Td) |
| Viewing Angle | 60/60/40/55 (Typ.)(CR≥10)(L/R/U/D) |
| Frequency | 60Hz |
| Lamp Type | 3S16PWLEDWithout Driver |
| Signal Interface | TTL (1 ch, 6-bit), 60 pins |
| Input Voltage | 3.3/3.3/9.1/17.0/-5.6V (Typ.)(VCC/VDD1/VDD2/VGG/VEE) |
| A102VW01 V7 | AUO | 10.2 | 800×480 |
| AT102TN03 V.3 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.8 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.9 | Innolux | 10.2 | 800×480 |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| TX26D30VM1AAA | KOE | 10.2 | 800×256 |
| A104SN03 V1 | AUO | 10.4 | 800×600 |
| AT080TN01 | Innolux | 8.0 | 800×480 |
| AT080TN52 | Innolux | 8.0 | 800×600 |
| B070ATN01.0 | AUO | 7.0 | 1024×600 |
| CLAA080MB0DCW | CPT | 8.0 | 800×600 |
| EJ080NA-04C | Innolux | 8.0 | 1024×768 |
| HSD084ISN1-A01 | HannStar | 8.4 | 800×600 |
| HSD101PFW3-D00 | HannStar | 10.1 | 1024×600 |
| LW700AT9309 | Innolux | 7.0 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |