| PartNumber | CLAP070MA21BW |
| Brand | CPT |
| Size | 7.0 |
| Application | DPF |
| Resolution | 800(RGB)×600 , SVGA |
| Composition | CELL |
| Brightness | 0 |
| CR | |
| Colors | 16.2M |
| Backlight | No B/L |
| Interface | TTL |
| Panel Brand | CPT |
| Panel Model | CLAP070MA21BW |
| Panel Type | a-Si TFT-LCD , CELL |
| Panel Size | 7.0 inch |
| Display Mode | TN, Normally White, Transmissive |
| Active Area | 141.6×106.2 mm |
| Outline | 149.3×116.1 mm |
| Surface | Antiglare, Hard coating (3H) |
| Glass Depth | 0.50+0.50 mm |
| Transmissivity | 6.1% (Typ.)(with Polarizer) |
| Contrast Ratio | |
| Display Colors | 16.2M (6-bit + FRC) |
| Response Time | 20 (Typ.)(Tr+Td) |
| Viewing Angle | 60/60/70/70 (Typ.)(CR≥10)(L/R/U/D) |
| Frequency | 60Hz |
| Signal Interface | TTL (1 ch, 8-bit), 60 pins |
| Input Voltage | 3.3/9.6/18/-6V (Typ.)(DVDD/AVDD/VGH/VGL) |
| 70WVW3A | SII | 7.0 | 800×480 |
| A070XN01 V0 | AUO | 7.0 | 1024×768 |
| AT070TN01 | Innolux | 7.0 | 480×234 |
| AT070TN83 V.1 | Innolux | 7.0 | 800×480 |
| CLAP070WP03XG | CPT | 7.0 | 800×1280 |
| EJ070NA-01F | Innolux | 7.0 | 1024×600 |
| HV070WX2-1E0 | HYDIS | 7.0 | 800×1280 |
| LTA070B052F | TOSHIBA | 7.0 | 800×480 |
| N070ICE-GB2 | Innolux | 7.0 | 800×1280 |
| TPF0702002N | JDI | 7.0 | 1200×1920 |
| A070SN02 V0 CELL | AUO | 7.0 | 800×600 |
| A101VW01 V1 | AUO | 10.1 | 800×480 |
| AT080TN43 | Innolux | 8.0 | 800×600 |
| AT080TN52 | Innolux | 8.0 | 800×600 |
| CLAA070MA21BW | CPT | 7.0 | 800×600 |
| HSD100IFW1-F03 | HannStar | 10.1 | 1024×600 |
| HSD100IXN1-A00 | HannStar | 10.0 | 1024×768 |
| TM070RDH13 | Tianma | 7.0 | 800×480 |
| TM080SV-04L01 | SANYO | 8.0 | 800×600 |
| TR-LM7WR3PS | Panasonic | 7.0 | 480×234 |